PanelPilot | CTL-SW-MC

31,30 ex. tax

Momentary Touchless, Normally Closed, Infrared Proximity Switch.

CTL-SW-MC
CTL-SW-MC 31,30 ex. tax

for higher quantity pricing.

The CTL-SW-MC is a momentary touchless, normally closed, infrared proximity switch, designed to be easily activated without the need for physical contact. The device runs on 12VDC drawing a minimal 15mA when in standby mode where it will display a red LED and 25mA when active where it will display a green LED.

Also in the range:
CLT-SW-MO – Normally open
CTL-SW-LC – Normally closed
CTL-SW-LO – Normally open

Sensor Type
Infrared
Panel cut out diameter
22 – 23mm
Detection Range
4cm
Required electrical supply
9.6V to 24V
Operating current
15mA (standby) 25mA (active)
Relay contact rating
1A 125VAC/2A 30VDC
Contact resistance
100 mOhm
LED Color
Red – Standby Green – Active
Ingress (IP) rating
IP67
Impact (IK) Rating
IK10
Operating temperature -30°C to +70°C
Minimum number of operations
1,000,000
Body material
Aluminum alloy
Lens material
Polycarbonate
Length of wires provided
175mm

 

What is the maximum switching capacity?

1A 125VAC or 2A 30VDC resistive load.

Are there other LED color options available?

Please contact our sales teams for other LED color options.

More Support

PanelPilot | CTL-SW-MC

31,30 ex. tax

Tijdelijk Aanraakloos, Normaal Gesloten, Infrarood Naderingsschakelaar.

for higher quantity pricing.

De CTL-SW-MC is een infrarood naderingsschakelaar zonder aanraken, normaal gesloten, die ontworpen is om eenvoudig geactiveerd te worden zonder dat er fysiek contact nodig is. Het apparaat werkt op 12VDC en trekt minimaal 15mA in stand-by waarbij het een rode LED weergeeft en 25mA als het actief is waarbij het een groene LED weergeeft.

Ook in de reeks:

CLT-SW-MO – Normaal open

CTL-SW-LC – Normaal gesloten

CTL-SW-LO – Normaal open

Type sensor
Infrarood
Diameter paneeluitsnijding
22 – 23 mm
Detectiebereik
4cm
Benodigde elektrische voeding
9,6V tot 24V
Bedrijfsstroom
15mA (stand-by) 25mA (actief)
Relaiscontactclassificatie
1A 125VAC/2A 30VDC
Contactweerstand
100 mOhm
LED-kleur
Rood – Stand-by Groen – Actief
IP-classificatie (Ingress)
IP67
Invloed (IK) Classificatie
IK10
Bedrijfstemperatuur -30°C tot +70°C
Minimumaantal bewerkingen
1,000,000
Materiaal behuizing
Aluminiumlegering
Materiaal lens
Polycarbonaat
Lengte van meegeleverde draden
175 mm

Wat is de maximale schakelcapaciteit?

1A 125VAC of 2A 30VDC weerstandsbelasting.

Zijn er andere LED kleuropties beschikbaar?

Neem contact op met onze verkoopteams voor andere LED kleuropties.

Meer ondersteuning

PanelPilot | CTL-SW-MC

31,30 ex. tax

Interruttore di prossimità momentaneo senza contatto, normalmente chiuso, a infrarossi.

for higher quantity pricing.

Il CTL-SW-MC è un interruttore di prossimità a infrarossi momentaneo senza contatto, normalmente chiuso, progettato per essere attivato facilmente senza bisogno di contatto fisico. Il dispositivo funziona a 12 VDC con un assorbimento minimo di 15 mA quando è in modalità standby, dove viene visualizzato un LED rosso, e di 25 mA quando è attivo, dove viene visualizzato un LED verde.

Anche nella gamma:

CLT-SW-MO – Normalmente aperto

CTL-SW-LC – Normalmente chiuso

CTL-SW-LO – Normalmente aperto

Tipo di sensore
Infrarossi
Diametro di taglio del pannello
22 – 23 mm
Intervallo di rilevamento
4 cm
Alimentazione elettrica necessaria
Da 9,6 V a 24 V
Corrente di esercizio
15mA (standby) 25mA (attivo)
Valutazione dei contatti del relè
1A 125VAC/2A 30VDC
Resistenza di contatto
100 mOhm
Colore del LED
Rosso – Standby Verde – Attivo
Grado di protezione IP (Ingress)
IP67
Valutazione dell’impatto (IK)
IK10
Temperatura di esercizio Da -30°C a +70°C
Numero minimo di operazioni
1,000,000
Materiale della scocca
Lega di alluminio
Materiale della lente
Policarbonato
Lunghezza dei fili in dotazione
175 mm

Qual è la capacità massima di commutazione?

Carico resistivo da 1A 125VAC o 2A 30VDC.

Sono disponibili altre opzioni di colore dei LED?

Contatta il nostro team di vendita per altre opzioni di colore dei LED.

Più supporto

PanelPilot | CTL-SW-MC

31,30 ex. tax

Momentaner berührungsloser, normalerweise geschlossener Infrarot-Näherungsschalter.

for higher quantity pricing.

Der CTL-SW-MC ist ein berührungsloser, normalerweise geschlossener Infrarot-Näherungsschalter, der einfach und ohne physischen Kontakt aktiviert werden kann. Das Gerät wird mit 12 VDC betrieben und verbraucht im Standby-Modus, in dem eine rote LED leuchtet, nur 15 mA und im aktiven Zustand, in dem eine grüne LED leuchtet, 25 mA.

Auch im Angebot:

CLT-SW-MO – Normalerweise offen

CTL-SW-LC – Normalerweise geschlossen

CTL-SW-LO – Normalerweise offen

Sensor Typ
Infrarot
Durchmesser des Paneelausschnitts
22 – 23mm
Erfassungsbereich
4cm
Erforderliche elektrische Versorgung
9,6V bis 24V
Betriebsstrom
15mA (Standby) 25mA (aktiv)
Nennwert des Relaiskontakts
1A 125VAC/2A 30VDC
Durchgangswiderstand
100 mOhm
LED Farbe
Rot – Standby Grün – Aktiv
Schutzart (IP)
IP67
Aufprall (IK) Bewertung
IK10
Betriebstemperatur -30°C bis +70°C
Minimale Anzahl von Operationen
1,000,000
Material Körper
Aluminiumlegierung
Material der Linse
Polycarbonat
Länge der mitgelieferten Drähte
175mm

Wie hoch ist die maximale Schaltleistung?

1A 125VAC oder 2A 30VDC ohmsche Last.

Sind auch andere LED-Farben erhältlich?

Bitte kontaktieren Sie unser Verkaufsteams für andere LED-Farboptionen.

Mehr Unterstützung

PanelPilot | CTL-SW-MC

31,30 ex. tax

Interruptor de proximidad por infrarrojos, momentáneo, normalmente cerrado y sin contacto.

for higher quantity pricing.

El CTL-SW-MC es un interruptor de proximidad por infrarrojos, momentáneo, normalmente cerrado y sin contacto, diseñado para activarse fácilmente sin necesidad de contacto físico. El dispositivo funciona con 12 V CC, consumiendo un mínimo de 15 mA en modo de espera, cuando muestra un LED rojo, y de 25 mA cuando está activo, cuando muestra un LED verde.

También en la gama:

CLT-SW-MO – Normalmente abierto

CTL-SW-LC – Normalmente cerrado

CTL-SW-LO – Normalmente abierto

Tipo de sensor
Infrarrojos
Diámetro de corte del panel
22 – 23 mm
Rango de detección
4 cm
Suministro eléctrico necesario
De 9,6 V a 24 V
Corriente de funcionamiento
15 mA (en espera) 25 mA (activo)
Potencia del contacto del relé
1A 125VAC/2A 30VDC
Resistencia de contacto
100 mOhmios
Color del LED
Rojo – En espera Verde – Activo
Índice de penetración (IP)
IP67
Clasificación de impacto (IK)
IK10
Temperatura de funcionamiento -30°C a +70°C
Número mínimo de operaciones
1,000,000
Material del cuerpo
Aleación de aluminio
Material de la lente
Policarbonato
Longitud de los cables suministrados
175 mm

¿Cuál es la capacidad máxima de conmutación?

Carga resistiva de 1A 125VAC o 2A 30VDC.

¿Hay otras opciones de colores LED disponibles?

Ponte en contacto con nuestros equipos de ventas para conocer otras opciones de colores LED.

Más ayuda

PanelPilot | CTL-SW-MC

31,30 ex. tax

Détecteur de proximité infrarouge momentané, sans contact et normalement fermé.

for higher quantity pricing.

Le CTL-SW-MC est un détecteur de proximité infrarouge momentané, sans contact, normalement fermé, conçu pour être facilement activé sans contact physique. L’appareil fonctionne sur 12VDC et consomme un minimum de 15mA en mode veille où il affiche une LED rouge et 25mA en mode actif où il affiche une LED verte.

Également dans la gamme:

CLT-SW-MO – Normalement ouvert

CTL-SW-LC – Normalement fermé

CTL-SW-LO – Normalement ouvert

Type de capteur
Infrarouge
Diamètre de découpe du panneau
22 – 23 mm
Plage de détection
4cm
Alimentation électrique requise
9,6V à 24V
Courant d’exploitation
15mA (veille) 25mA (actif)
Valeur nominale du contact de relais
1A 125VAC/2A 30VDC
Résistance de contact
100 mOhm
Couleur de la LED
Rouge – Attente Vert – Actif
Indice de protection (IP)
IP67
Évaluation de l’impact (IK)
IK10
Température de fonctionnement De -30°C à +70°C
Nombre minimum d’opérations
1,000,000
Matériau du corps
Alliage d’aluminium
Matériau de l’objectif
Polycarbonate
Longueur des fils fournis
175 mm

Quelle est la capacité de commutation maximale ?

Charge résistive de 1A 125VAC ou 2A 30VDC.

Existe-t-il d’autres options de couleurs de LED ?

Veuillez contacter nos équipes de vente pour d’autres options de couleurs de LED.

Plus de soutien